Mold Wizard(NX-8.0)-Video Training <br /> <br />Chapter-1 <br /> <br />Introduction & Overview <br />Knowledge Base Solution <br />Tooling Industry Challenge <br />Mold Wizard Work Flow <br />Mold Tools <br />Mold Wizard & Roles in NX <br />Types of Molding Support in NX & Details <br />Benefits of Mold Wizard <br />Chapter-2 <br /> <br />Extract the 3D models <br />Check your setup <br />Analyze parting readiness <br />Initialize the mold design project <br />Chapter-3 <br /> <br />View the assembly structure <br />Orient and position the assembly <br />Define a work piece <br />Create a cavity layout <br />Chapter-4 <br /> <br />Analyze the parting regions <br />View core and cavity regions <br />Patch open areas <br />Create the parting surface <br />Chapter-5 <br /> <br />Add a mold base <br />Add standard parts <br />Add ejector pins <br />Trim the ejector pins <br />Chapter-6 <br /> <br />Create pockets- -for locating ring screws, ejector pins, and mold inserts. <br />Add gates <br />Design a runner to connect the two gates <br />Create pockets-for the gates and runners in the mold inserts <br />All projects Design script: <br /> <br />Introduction & Project Setup <br />Mold Volume region Analysis <br />Mold Co-ordinate system setting <br />Shrinkage <br />Work piece Definition <br />Post Region Analysis <br />Patch Operation for parting <br />Parting Line and Parting surface definition <br />Define core and Cavity <br />Prod Mold core/Cavity extraction and Visualization <br />Simulation <br />Project1: Project Remote <br /> <br />Project2: Project Bezel <br /> <br />Project3: Project Camera <br /> <br />Project4: Project Casting <br /> <br />Project5: Project Complex Plastic <br /> <br />Project6: Project Pen Cap
